Manual

Getting Started 19
PXI-3980
4. Elevate the latch until the PXI-3980 is fully seated in the
chassis backplane.
5. Fasten the four mounting screws on the faceplate of
PXI-3980, and connect all peripheral devices.
2.3.13 Replacing the Hard Drive or Solid State Drive
The PXI-3980 provides a SATA 2.0 port with a pre-installed 2.5"
SATA hard drive or solid state drive. Replacing the HDD or SSD is
accomplished as follows.
1. Locate the four screws attaching the drive to the
bracket on the side of the PXI-3980.
2. Remove the screws, as shown.