RuffSystemTM User’s Guide P/N 50-1Z000-2010
Notice Page DISCLAIMER ADLINK Technology, Incorporated makes no representations or warranties with respect to the contents of this manual or of the associated ADLINK products, and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. ADLINK shall under no circumstances be liable for incidental or consequential damages or related expenses resulting from the use of this product, even if it has been notified of the possibility of such damages.
Contents RuffSystem Setup ...............................................................................................................................1 About the RuffSystem ......................................................................................................................1 Using this Guide .........................................................................................................................1 Requirements ...............................................................
Contents iv User’s Guide RuffSystem
RuffSystem Setup About the RuffSystem The RuffSystem products are intended for users of turn-key embedded systems who prefer long life-cycle, configuration controlled computers instead of desktop grade systems with frequently changing motherboards. RuffSystem models feature the LittleBoard 735 Single Board Computer (SBC), the LittleBoard 800 SBC, or the COM 840 (Computer On Module) with the EBX baseboard.
RuffSystem Setup Device/Peripheral Connections • Ethernet (LAN) connection • USB device connections • Up to two PC/104 expansion modules Power Specifications Tables 1 through 3 define the current draw values of the three RuffSystem models, featuring either the LittleBoard 735, COM 840, or the LittleBoard 800. The tables capture In-Rush, Idle, and Burn-In-Test (BIT) currents at incremental input voltages from +14 to +32 VDC.
RuffSystem Setup Table 2 lists the current draw values of the RuffSystem with the COM 840. Table 2. System Power Requirements (COM 840 with EBX Baseboard, 1.6 GHz CoreTM 2 Duo CPU) Input Type In-rush Current (@ 104.26W Power) Typical Idle Current (@ 37.96W Power) Typical BIT Current (@ 48.43W Power) +14VDC 7.45A 2.71A 3.46A +16VDC 6.52A 2.38A 3.03A +18VDC 5.79A 2.11A 2.69A +20VDC 5.21A 1.90A 2.42A +22VDC 4.74A 1.73A 2.20A +24VDC 4.34A 1.58A 2.02A +26VDC 4.01A 1.46A 1.
RuffSystem Setup Table 3 lists the current draw values of the RuffSystem with the LittleBoard 800. Table 3. System Power Requirements (LittleBoard 800, 1.4 GHz Pentium M CPU) Input Type In-rush Current (@ 170.88W Power) Typical Idle Current (@ 9.54W Power) Typical BIT Current (@ 13.18W Power) +14VDC 12.21A 0.68A 0.94A +16VDC 10.68A 0.60A 0.82A +18VDC 9.49A 0.53A 0.73A +20VDC 8.54A 0.48A 0.66A +22VDC 7.77A 0.43A 0.60A +24VDC 7.12A 0.40A 0.55A +26VDC 6.57A 0.37A 0.
RuffSystem Setup What’s in the Box The Contents List identifies the items in the shipping box for the RuffSystem and RuffSystem Accessory Kit (sold separately.) See Figure 1.
RuffSystem Setup Setup Steps Follow the setup steps in this section in the order listed. Skip any steps that do not apply to your application. References to other ADLINK manuals are provided in this section for more information about installation and use of this RuffSystem. Table 5. Preparations 1) Open shipping box. 2) Verify contents. • Locate the RuffSystem Contents List. • Unpack the contents of the shipping box.
RuffSystem Setup Installing Mounting Hardware 6) Install mounting screws. • Install mounting screws for surface or wall mounting to the four mounting flanges of the RuffSystem. See Figure 2. 8.18" 208 mm CL 11.02" 280 mm 10.00" 254 mm 12.20" 310 mm CL CL CL 5.51" 140 mm 7,36" 187 mm Figure 2.
RuffSystem Setup Connecting Peripherals 7) Connect the cables and their respective peripheral cables/devices. • Refer to Figure 3 for locations and descriptions of the connectors and controls before making connections or powering on the RuffSystem. • Connect the keyboard to the appropriate connector on the RuffSystem I/O panel (USB or PS/2). • Connect the mouse to the appropriate connector on the RuffSystem I/O panel (USB or PS/2).
RuffSystem Setup Table 6. I/O Panel Connectors, Controls, and Indicators (Refer to Figure 3 for locations.) Control/Connector Description Power Switch This power switch controls DC power and turns on power to the RuffSystem. NOTE DC Power In The Power Switch on the LittleBoard 800 RuffSystem is a momentary switch. Press and momentarily hold this switch (≈ 1 second) to turn on power to the RuffSystem. This power connector accepts input from an external power source.
RuffSystem Setup Applying Power to the RuffSystem 8) Follow these steps to apply power to the RuffSystem. • Connect the AC Mating cable to the AC Adapter (options.) See Figure 1 on page 5. • Plug in the DC Cable Connector from the AC Adapter to the DC IN connector on the RuffSystem. See Figure 3 on page 8.
RuffSystem Setup 10) Using the Optional Operating System (OS) RuffSystem • You should see a prompt on the monitor screen indicating the optional OS is loading, or has loaded. • Refer to the desired OS manual (not provided by ADLINK.) • Refer to the optional LittleBoard 735, LittleBoard 800, or COM 840 Support Software DVDs or QuickDrives for additional drivers and instructions.
RuffSystem Setup 12 User’s Guide RuffSystem
Appendix A Technical Support ADLINK Technology, Inc. provides a number of methods for contacting Technical Support listed in the Table A-1 below. Requests for support through the Ask an Expert web page are given the highest priority, and usually are addressed within one working day. • ADLINK Ask an Expert – This is a comprehensive support center designed to meet all your technical needs. This service is free and available 24 hours a day through the Ampro By ADLINK web page at http://www.adlinktech.
Appendix A Technical Support Table A-1. Technical Support Contact Information ADLINK Technology Shanghai Address: Ϟ⍋Ꮦ⌺ϰᮄऎ㢇䏃 ো (201203) 300 Fang Chun Rd., Pudong New Area, Shanghai, 201203 China Tel: +86-21-5132-8988 Fax: +86-21-5132-3588 Email: market@adlinktech.com ADLINK Technology Shenzhen Address: 䂀⧂ゑ◦⼀◉䱠㔏⥼◦◉浧㠿◦ₒ拢 㟿ⷦ㔏㦾⥼ A1 㪚 2 㰋 C ◉ (518057) 2F, C Block, Bldg. A1, Cyber-Tech Zone, Gao Xin Ave. Sec. 7, High-Tech Industrial Park S.
Appendix B Physical Dimensions Figure B-1 shows the RuffSystem enclosure dimensions. 8.18" 208 mm CL 11.02" 280 mm 10.00" 254 mm 12.20" 310 mm CL CL CL 5.51" 140 mm 3.90" 99 mm (+/- 2 mm) 7,36" 187 mm Figure B-1.
Appendix B 16 Physical Dimensions User’s Guide RuffSystem
