Owner's Manual

REGULAR MAINTENANCE
WARNING
Disconnect power cord before cleaning any parts of the unit.
CLEANING THE CONDENSOR COIL
For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and
lint. It is highly recommended that the condenser coil be cleaned at least once a month. Clean
with a commercial condenser coil cleaner and brush the condenser fins from top to bottom.
After cleaning, straighten any bent fins with a fin comb.
CLEANING THE FAN BLADES AND MOTOR
If needed, clean the fan blades and motor with a soft cloth if there is any buildup. If it is
necessary to wash the fan blades, cover the fan motor first to prevent any kind of moisture
damage.
CLEANING THE INTERIOR OF THE UNIT
When cleaning the cabinet interior, use a mixture of mild soap and warm water. It is not
recommended to use steel wool, caustic soap, abrasive cleaners, or bleach as this may cause
damage to the stainless steel surface.
Wash door gaskets on a weekly basis. Remove the door gasket from the frame of the door,
soak in a mixture of mild soap and warm water for 30 minutes and dry with a soft cloth. Place
back on the door and check that the gaskets form a proper seal after they are replaced.
Periodically remove the shelves and pilasters from the unit and clean them with a mild soap and
water mixture. To remove the pilasters, first remove the shelves and shelf brackets. Then lift
the pilaster up and out.