Specifications

WAC 5 6 8 USER MAN final 3/2/05 12:23 PM Page i_
OPERATINGiNSTRUCTiONS
You can easily operate this air conditioner by pressing relevant
button on the control pane[ as we[[ as the remote control
(_) Button
The air conditioner will be started when it is energized or will
be stopped when it is in operation, if you press this button.
When the air conditioner is heating, allow 3 minutes after you
press this button.
Mode button
Each time Mode button is pressed, the operation
mode is changed in sequence:
5K, 6K, 8K cooling only: COOLING FAN ONLY
ENERGY SAVING COOLING
8K with heater COOLING FAN ONLY HEATING
ENERGY SAVING COOLING
NOTE: After setting the mode, allow three (3) minutes before
switching to another mode. In the FAN ONLY Mode, Room
Temperature display range is from O°C (32°F) to 380C (99°F).
Room Temperature below 32°F, the Temperature display LO.
Room Temperature above 99°F, the Temperature display HI.
Control Panel
Fan Speed button
Used to select fan speed in sequence auto, low, medium
and high (low and medium are in same fan speed).
indication symbols of LED on control panel :
Timer button
Used to set or cancel timer operation.
When the unit is in operation, you can set OFF TIMER.
When the unit is off, you can set ON TIMER.
Timer setting range is 0 to 24 hours.
If the OFF TIMER is set, the time LED displays the
remaining time to turn off the unit for only 12 seconds,
then LED shifts to display set temperature. If you press
TIMER button within the 12 seconds, OFF TIMER will be
cancelled.
_ Auto fan speed _ Cooling
I--a J--I "F
Low fan speed ,_ Fan only Cl I"l h
Display set temp
,_ Medium fan speed "]_" Heating Display set timer
High fan speed 42: Energy-saving
Timer
Above LED lights on when
the relevant mode is in use.
If the ON TIMER is set, the timer LED displays the
remaining time to turn on the unit. If you want to cancel
ON TIMER, press TIMER button.
• • Button
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
If the two keys are pressed at the same time, the temperature LED display will alternate between °C and °E
I NOTE: Temperature setting range is from 19°C (66°F) to 31 °C (88°F).