Manual

Do not use this dispenser to add powdered chlorine or color-safe
bleach to your wash load. The dispenser is for liquid chlorine
bleach only. Color safe or powdered bleach should be added with
your detergent.
Adjust water level to load size. Clothes should move freely. To
change to a higher water level after agitation starts, you may turn
knob to desired setting.
On models with a variable Load Size or Water Level control, you
should turn the knob to RESET, then to the desired setting.
You should select a wash temperature based on the type of fabric
and soils being washed. For best results, use the warmest wash
water safe for the fabric. Follow garment label instructions.
Auto "l'emp Control
Some models use the Auto Temp Control. This feature maintains a
uniform wash temperature by regulating incoming hot and cold
water. This helps eliminate undissolved detergent and ensures
consistent cleaning.
NOTE: Make sure that both hot and cold water faucets are turned
on, or the Auto Temp Control feature will not work properly.
R sse Conf s
You may turn the Extra Rinse Control knob to ON to get a second
rinse at the end of any of your regular cycles.
On models without an Extra Rinse Control knob you, may choose
a second rinse by pushing the cycle control knob in and rotating it
to any of the "Rinse" settings,
Some cycles may have an automatic Extra Rinse at the end of the
cycle.