Specification

The information contained herein is furnished without charge or obligation and the recipient assumes all
responsibility for its use. Because conditions of use and handling may vary and are beyond our control, we make no
representation about, and are not responsible or liable for, the accuracy or reliability of said information or the
performance of any product. Any specification, properties or applications listed herein are provided as information
only and in no way modify, amend, enlarge or create any warranty. Nothing contained herein is to be construed as
permission or as a recommendation to infringe any patent.
Typical Physical Properties
ADO Pro Pac
Raw Material: 100% Polypropylene
Type: Point-bond
Characteristic U.M Average Value Tolerance Test Method
Weight OSY 1.25 ± 10% ASTM D 3776-96
Thickness Mil 16 ± 10% EDANA 30.5-99
Tensile Strength M.D. N/2.54cm 28.10 lbs ± 20% ASTM D 5034-90
Tensile Strength C.D. N/2.54cm 24.74 lbs ± 20% ASTM D 5034-90
Elongation M.D. % 75 ± 20% ASTM D 5034-90
Elongation C.D. % 75 ± 20% ASTM D 5034-90
Trapezoid Tear M.D. N 8.99 lbs ± 20% ASTM D 5733-95
Trapezoid Tear C.D. N 11.01 lbs ± 20% ASTM D 5733-95
Air Permeability Cfm 450 ± 20% ASTM D 737-96