Specification
1510 Armstrong Road, P.O. Box 4275
Warsaw, IN 46581-4275
Telephone 574-267-7909 • Toll Free 800-343-0428 • Fax 800-382-8464
E-mail sales@flexaust.com • www.flexaust.com
ENGINEERING AND TECHNICAL DATA
Genesis
Mark II
(Page 2)
November 2004
SIZE INSIDE
DIMENSION
(INCHES)
APPROXIMATE
WEIGHT
(LBS./FT.)
MINIMUM
CENTERLINE
BEND RADIUS
(INCHES)
COMPRESSION
RATIO
MAXIMUM
RECOMMENDED
NEGATIVE PRESSURE
(IN./HG.)
MAXIMUM
RECOMMENDED
POSITIVE PRESSURE
(PSI)
1.5
.18
2.2
N/A
29
16
2
.23
3.5
N/A
29
14
2.5
.35
4
N/A
14
13.5
3
.42
5
N/A
9
12
3.5
.45
6
N/A
6
11
4
.55
6.25
N/A
4
10
Note: Technical data based on 2 ft. straight lengths of hose @ 72° F.
Disclaimer: The proper use and maintenance of hose and/or duct manufactured by Flexaust is the sole responsibility of the purchaser and
ultimate user of the product. This information is presented as a general guide only. The number of variables which can be present in any
application make firm recommendations impossible. Adequate testing under actual service conditions is necessary to properly establish
suitability. We take pride in the quality of all Flexaust products and we welcome comments and suggestions from our customers.