SDS

During cutting machining operations, avoid contact with eyes and skin. Wear protective
gloves. Avoid breathing dusts. Do not eat, drink or smoke in work areas. Wash hands
thoroughly after handling this material.
Conditions for safe storage, including any compatibilties:
Store in a cool dry space away from extreme high temperatures, open flames, strong
oxidizers, combustible materials, hot areas or other ignition sources. Avoid prolonged
storage in direct sunlight.
Store as a Group A substance according to NFPA 231.
8 Exposure Controls / Personal Protection
Occupational exposure Limits:
Consult local authorities for acceptable exposure limits.
.
INGREDIENT
ACGIH TWA
U.S OSHA TWA
ONTARIO (Canada) TWA
No recognized exposure limits for airborne chemical substances from this solid article.
Exposure Controls:
Engineering controls: Good general ventilation for normal conditions of use and during installation.
Personal protection: Follow the directions for personal protective equipment for the worksite. Appropriate
protective footwear is recommended when handling boards.
Inhalation: When dust concentrations in air exceed the occupational exposure guidelines, wear an
approved particulate respirator equipped with an N95, R95 or P95 filter.
A respiratory protection program that meets the regulatory requirements, such as
OSHA’s 29 CFR 1910.134 and ANSI Z88.2 or Canadian Standards Association (CSA)
Standard Z94.4, must be followed whenever workplace conditions warrant a respirator’s
use.
Eyes / Face: Wear safety glasses or goggles for all cutting operations.
Skin: Not required for normal use of this product, however it is good practice to wear gloves
and clean body-covering clothing.
9 Physical and Chemical Properties
Information on basic physical and chemical properties:
Appearance: Solid; tinted, thin foamed plastic sheathing. Green or blue-green.
Odor: Slight, sweet plastic odor.
Odor threshold: Not applicable.
pH: Not applicable.
Melting point: >93°C (200°F).
Initial boiling point and boiling range:
Not applicable.
Evaporation Rate: Not applicable.
Flash point: Not applicable.
Flammability: >260° C (500°F) ASTM D 1929.
Auto-ignition temperature:
>482°C (900°F).
Upper / lower flammability or explosive limits:
Not determined.
Explosive properties: Not applicable.
Oxidizing properties: Not applicable.
Sensitivity to mechanical impact: