User Guide

161
ADOBE AUDITION
User Guide
Click/Pop Eliminator
The Click/Pop Eliminator works by searching for anomalies in the audio data that could be construed as clicks or pops
(Detection), and then replacing or repairing the damaged location (Correction). If you want to clean up vinyl recordings
before transferring them to CDs or another digital medium, Click/Pop Eliminator is the effect to use. It’s more accurate
than just cutting out the click, or replacing the data with a straight line. You can correct an entire selection or instantly
remove a single click if one is highlighted.
Click/Pop Eliminator dialog
Use a high zoom level to isolate the click.
To speed up the repairing of single clicks, configure the F3 key to correct them when they are highlighted by first choosing
the Click/Pop filter and pressing Fill Single Click Now. The F3 key then repeats the last action without bringing up the
dialog box. You can also create a quick key in the Favorites menu for filling in single clicks.
Use the Spectral View feature with the spectral resolution set to 256 bands and a Window Width of 40% to see the clicks
in a waveform. See the Spectral Display area of Options > Settings > Display to adjust these parameters. Clicks will
ordinarily be visible as bright vertical bars that go all the way from the top to the bottom of the display.