User Manual

3. Together press B and D buttons for 3 seconds. A blue LED in fast blinking indicates the
pen is waiting to pair.
4. On your device, find Adonit Note-M stylus on the Bluetooth searching list, then select and
allow it to pair.
Note: A blue LED in fast blinking remains for 1 minute, and turns back to A blue LED in slow
blinking.
Why can’t I use the stylus feature after a successful
Mouse pairing?
Stylus and Mouse are separate features, it switches off stylus feature while using Mouse
feature. You need to switch over as you want to use the other feature.
To switch to using the mouse function, please press the B button (LED shows blue light).
To switch to using the stylus function, please press the I button (LED shows green light).
*If pairing is unsuccessful, please try 1. Remove all Bluetooth devices on your computer. 2.
Turn Bluetooth off then on again. 3. Repeat the pairing steps to reconnect the pen.
How do you turn off Note-M stylus?
Turn your Adonit Note-M stylus OFF by holding down both H and I buttons at the same time
over 3 seconds until light turns off. Note-M can be turned off from either stylus or mouse
mode.
Does Note-M automatically turn off?
Note-M will automatically turn off after 20 minutes if no button is pressed or no movement is
detected to the pen.
Does Note-M’s Bluetooth mouse auto reconnect to the
previous device?
Yes, it will auto reconnect to the previous device whenever switch over to the mouse mode
and as long as you did not remove pen from your Device.