User Manual

What devices does Snap 2 work with?
Snap 2 works with iPhone 6 and newer, and iPad 3 and newer.
How do you turn Snap 2 off?
To turn Snap 2 off, just press and hold the Power/Shutter button for 10 seconds, and a slow
fading out red light will show once and go off.
How long is the charge time for the Snap2? How long will the battery last?
Charge time: 1 hour
Battery: 7 hours of use
How do I setup my device’s Bluetooth with Snap 2?
• 1) Go to the Bluetooth settings on your iPhone/iPad.
• 2) Forget a device by pressing the "i" circle and tapping "Forget this device."
• 3) Forget all connected Bluetooth devices.
• 4) Turn off your iPhone/iPad. Then turn it back on.
• 5) Connect your stylus via compatible apps (i.e. GoodNotes, Photoshop Sketch, etc).
How do I charge my Snap 2?
To charge, connect a standard micro USB cable to the charging end of Snap 2. Snap 2 will be
fully charged in 1 hour and will last ~7 hours if used continuously.
How to Fix Most Bluetooth Connection Issues?
*"Forget" all the Bluetooth devices on your iPhone/iPad. To do this, follow the steps below:
• 1) Go to the Bluetooth settings on your iPhone/iPad.
• 2) Forget a device by pressing the "i" circle and tapping "Forget this device."
• 3) Forget all connected Bluetooth devices.
• 4) Turn off your iPhone/iPad. Then turn it back on.
• 5) Connect your stylus via compatible apps (i.e. GoodNotes, Photoshop Sketch, etc).