User's Manual


AdvancedRFTechnologies,Inc.  102

8.2.4.3.1 RFUCommissioning
This section allows the user to perform RFU commission. To perform RFU commissioning, select a DL Input
Commissioning Level from thedropdownmenu andclick Apply. The commissioning progress is displayedon the
CommissioningProgressbar.Anyerrors,warnings,andmessageswillappearviaapopupwindow.Please
referto
theADXInstallationGuidetodeterminetheproperRFUcommissioninglevels.

Figure8‐73 RFUCommissioning(Install–RFU)
8.2.4.3.2 Description
ThissectionallowstheusertosetthedescriptionofRFU.

Figure8‐74 Description(Install–RFU)

8.2.4.4 Install–ODU

Figure8‐75
Install–ODU
8.2.4.4.1 OpticCommissioning
This section will allow the user to perform an y optic compensation if it is necessary.The Commissioning
buttonwillturnorangeifopticcompensationisneeded.