User's Manual


AdvancedRFTechnologies,Inc.  57

7.1.6 BOMComparison&CheckBandConfiguration
 BOMcomparison
‐ OntheSysteminformationpageintheSystemmenu,thelistofallcomponentsconnectedtothe
ADX‐H‐NMSshouldmatchtheADXNavigationtree.ThislistcanbeusedtoverifyBOMgenerated
bydesignerorinstallerfor
allactivecomponents.Pleasenotethatpassivecomponentssuchas
theADX‐H‐CHC,ADX‐R‐CHC,ADX‐H‐PSU,andtheADX‐R‐4WSwillnotshowuponthisreport.
 CheckBandConfiguration
‐ CheckwhetherthebandconfigurationofADX‐H‐RFUisidenticaltothe
bandconfigurationofthe
ADXHPRunits.AnydiscrepancieswillappearintheSystemInformationreport.
‐ Check to see if there are multiple remote modules with the same frequency bands within 1
remoteunit.ThisinformationisdisplayedontheSystemInformationpageintheSystemmenu
asnotificationmessage.

7.1.7 Lockcurrentnavigationtree
 IftherearenoerrorsintheprocessofBOMComparison&CheckBandConfiguration,thenlocktheNavigation
Treebyclikingonthe“LockSystem”button.
‐ After locking the Navigation Tree, link fail alarms should not appear.If link fail alarms are
present,pleasecheckthephysicalconnectionofthedevicewiththelinkfailalarm.
‐ The system must first be placed in the “Unlock” state before adding any new devices.Newly
added devices will appear in the Navigation Tree when the page is refreshed.Once all new
hardwarehasbeenadded
totheNavigationTree,thetreemustbelockedbeforecommissioning
thesystem.
 