User's Manual


AdvancedRFTechnologies,Inc.  35

(WARNING:ThecircuitswitchontheADRF‐BBUmustbesettotheOFFpositionbeforeconnectingtheADRF‐
BBUtotheADX‐H‐PSUtopreventdamagetotheADX‐H‐PSUortheADRF‐BBUandpersonalinjury.)
Note: Please contact ADRF Technical Support for assistance if you are
 unfamiliar with the installation
procedureofourbatterybox.

TheBatteryInstallportisusedtoletADX‐H‐NMSknowifanADRF‐BBUisconnectedtotheADX‐H‐PSUornot.
Ifan ADRF‐BBUisconnected withoutthecableconnectiontoBatteryInstallport,theADX
‐H‐NMSwillnot detect
theADRF‐BBU.


TheprocedureforconnectingHEPSUtoBBU

 BATTS/WOFF
 Connect ADRF‐BBU to HE PSU Battery port and Battery Install port using HE battery
cable
 BATTS/WON


3.1.6 OptionalBandCombinerUnit(ADX‐H‐BCU‐x)
SOFT FAILPOWER
ADX-H -BCU-P

DL IN 3
BAND COM
CH3 CH2 CH1 SUM
DPX 3UL OUT 3DL IN 2DPX 2UL OUT 2DL IN 1 DPX 1UL OUT 1 D L O U T U L I N

Figure3‐21 ADX‐H‐BCUFront&RearView
 Functions&Features
‐ Combinesandbalancesupto3carriers’signals
‐ Easilysupportsmultiplecarriers’signalsbyaddingasinglepieceofequipment
‐ Reducescomplexityandexpansioncoststosupportmultiplecarriers’signalsinasingle
system
‐ Inputrange:+5~+25dBm
 Specifications
‐ Size:19.0x12.9x1.7inches
‐ Weight:9.9lbs
3.1.6.1 LEDs
TheADX‐H‐BCUhasthefollowingLEDsonthefrontpanelasshowninFigure3‐22.
POWER SOFT FAIL

Figure3‐22 BCULED
Table3‐5 BCULEDSpecifications
ADXDAS‐Module Specifications
Power SolidGreen ModulepowerisON
OFF ModulepowerisOFF
메모 [C18]: BCUH추가필요검토