User's Manual


AdvancedRFTechnologies,Inc.  40

TheADX‐HPRisoperatedattheonly110VAC.
Thesocket‐outletshallbeinstalledneartheequipmentandshallbeeasilyaccessible
(WARNING: The AC switch must be set to OFF before cable connection to avoid equipment damage and
personalinjury.)
(WARNING:Toavoiddamage,besure110VAC
foroperationofADX‐HPR.)
(CAUTION:DOUBLEPOLE/NEUTRALFUSING.)

TheprocedureforconnectingHPR
 ACS/WOFF
 ACcableconnection
 Opticconnection
 RFcableconnection
 RS485connection
 ACS/WON
3.2.4 DCOn/OffSwitch,DCPort


Figure3‐30 HPRDCPort


Figure3‐31 HPRDCSwitch

TheDCPoweron/offswitchislocatedonPSUintheenclosureofeachADX‐HPR.
TheADX‐HPRisoperatedattheonly‐48VDC.
Thesocket‐outletshallbeinstalledneartheequipmentand
shallbeeasilyaccessible
메모 [C20]: DC고려사항추가