User's Manual


AdvancedRFTechnologies,Inc.  46

5.2 HPR
5.2.1 WallMount
ADX‐HPRissupportonlywallmount.

Figure5‐3 HPRWallMount



6. INSTALLATION
6.1 Pre‐InstallationInspection
PleasefollowtheseproceduresbeforeinstallingADXHPRequipment:
o Verifythenumberofpackagesreceivedagainstthepackinglist.
o Check all packages for
external damage;report any external damage to the shipping carrier. If
thereisdamage,ashippingagentshouldbepresentbeforeyouunpackandinspectthecontents
becausedamagecausedduringtransitistheresponsibilityoftheshippingagent.
o Open and check each package against the packing list. If any
 items are missing, contact ADRF
customerservice.
o Ifdamageisdiscoveredatthetimeofinstallation,contacttheshippingagent.
o Verify the AC voltagewith DVM (Volt meter) is 110V AC. IncorrectAC voltage can damage the
ADXequipment.
o This power of this system shall be supplied
through wiring installed in a normal building. If
powereddirectlyfromthemainsdistributionsystem,itshallbeusedadditionalprotection,such
asovervoltageprotectiondevice.
o Overvoltagecategory(OVC)&Pollutiondegree(PD)
Overvoltagecategory(OVC) OVCII
Pollutiondegree(PD) PD2