User's Manual


AdvancedRFTechnologies,Inc.  51

6.2.2 RUInstallationProcedure
WallmountingtheADXHPR
 Mountprocedure
‐ ThefollowingstepsshouldbefollowedwhilemountingtheRemoteModule

 VerifythattheHPRandMountingholeareingoodcondition
 SeparatethewallmountbracketfromtheHPR
 Placedthewallmount
bracketagainstthewallandmarkoffthemountingholes
 Drillholes(4holes,18Φmm)intheinstallationsurfacetheninserttheenclosedanchorbolts
 Boltthemountingbrackettothewall
 InstalltheHPRtothemountingbracket
 FastentheHPRtothemountingbracketusingthe
includedscrews
 VerifythattheHPRissecurelyattached
 ConnecttheAntennacable
 ConnectthePower
 ConnecttheOpticcable(ifapplicable)