User's Manual


AdvancedRFTechnologies,Inc.  67

7.3 DASInstallVerification
7.3.1 SettingSNMP&RemoteIP
 GotoInstallpageofNMS(refertosection8.2.4.1.4)
 Whenexternalmodemboxisconnected,usershouldsetSNMP&RemoteIPinformation.
7.3.2 VerificationthroughWebbasedGUI
 GotoSysteminformationpageofSystem(refer
tosection8.2.5.4.1)
‐ CheckifRemoteModulewithsamefrequencybandexistmorethanonewithinoneHPR.
‐ CheckifthereareanynoncommissionedmodulesinHEorRU.
‐ Checkifanycriticalalarmsarepresent.
7.3.3 ULnoisepowerdetection
When the UL noise levels is
larger than the expected value, ADX DAS has a function that will measure the
uplinknoisefor eachHPRand willgeneratesareport withthe ULnoiselevels.Thiswillhelptheuserdetermine
whichHPRmightbethecauseoftheelevatedULnoise.
 ULnoisepowermeasurement
canbeperformedforonlyonefrequencybandatatime.
 Formoreinformation,refertosection8.2.3.3.3.
 