User's Manual


AdvancedRFTechnologies,Inc.  70

8.2.1.3 PowerStatus
Displaythepowersourcethatiscurrentlybeingused.
Table8‐3 PowerSupplyStatus
InputPowerStatus DisplayImage
AC
Battery
8.2.1.4 CommissioningStatus
Displaywhetherornotthemodulehassuccessfullybeencommissioned.
Table8‐4 CommissioningICON
Status DisplayImage
Commissioned
Not‐Commissioned
8.2.1.5 Information

Figure8‐4 ADXDASGeneralInformation
 Information: Displays the serial number, latitude/longitude, firmware version of selected module, and Web
GUIversionoftheNMS.
 Location:DisplaystheaddresswheretheADXDASisinstalled.
 Description:Displaysthedescriptionofselectedmodule.Thedescriptionof
eachmodulecanbeeditedfrom
the Install tab.It is recommended to use the location of the module as the description.This description
informationcanbeseenwhenhoveringoverthedevicetreeinordertoeasilyidentifyeachcomponent.
 TechnicalSupport:DisplaysADRF’sTechnicalSupportcontactinformation.

InstallerContactInfo:Displaysthecontactinformationoftheinstaller. 