User's Manual


AdvancedRFTechnologies,Inc.  72

Table8‐5 SystemSummaryDescription
Parameters Description
Connected DisplaythenumberofmodulesphysicallyconnectedtoADXDAS
SoftFail Displaythenumberofsoftfailpresentoneachmodule
HardFail Displaythenumberofhardfailpresentoneachmodule
LinkFail Displaythenumberoflinkfailpresentoneachmodule
NotCommissioned Displaythenumberofnon‐commissionedorcommissionfailedmodule
Commissioned Displaythenumberofsuccessfullycommissionedmodule
8.2.2.1.2 HEView/HPRView,SystemScanTime
 HEView/RUView
‐ DisplayswhethertheNMSissettoHEvieworHPRview.
‐ Refertosection3.1.1.4
 SystemScanTime
‐ Displaysthetimeittakestoscanandupdatetheinformationofallthemodules
thatareonthe
navigationtree.Thistimewillincreaseasmorecomponentsareaddedtothesystem.
‐ WhenNavigationTreeisunlocked,theusershouldwaitatleastthe“SystemScanTime”forthe
systemtodetectnewlyaddedhardware.

Figure8‐7 Systemscantime,HEview/RU
view
8.2.2.1.3 HEAlarmStatus
DisplaythealarmstatusofeachHEcomponent.

Figure8‐8 HEalarmstatus
