User's Manual


AdvancedRFTechnologies,Inc.  83


8.2.2.6.1 Band
Displaythe spectrum that is being used.The bandcolumn displaysthe bandwidththat hasbeen used.The
downlinkcolumndisplaysthecenterfrequencyoftheuseddownlinkband.Theuplinkcolumndisplaysthecenter
frequencyoftheuseduplinkband.

Figure8‐29 PCSBandInformation(Status
–RemoteModule)
8.2.2.6.2 Power&Gain(Admin/User)
DisplaytheDownlinkoutput,Downlink/UplinkAttenuation,andUplinkInput/output.

Figure8‐30 Power&Gain(Admin)

Figure8‐31 Power&Gain(User)
 Admin
o Input[dBm]:DisplaystheRFinputlevelforUplinkonlyfortheRemoteModule.
o
ALCAtten[dB]:TheamountofattenuationusedwhenALCisactivate.
o Atten[dB]:Theamountofattenuationmanuallysetbytheuser.
o [M]Output[dBm]:OutputpowerofRFtransceiver(1
st
stageamplification).
o [H]Output[dBm]:OutputpowerofdownlinkHPA(2
nd
stageamplification).
 User
o Input[dBm]:DisplaystheRFinputlevelforUplinkonlyfortheRemoteModule.
o Atten[dB]:Theamountofattenuationmanuallysetbytheuser.
o Output[dBm]:Displaysthetotalcompositeoutputpower.

 