User's Manual


AdvancedRFTechnologies,Inc.  87

8.2.3.2.2 Reboot/FactorySetting
AllowstheuserrebootorrestorefactorysettingsoftheBCU.

Figure8‐39 Control–BCUReboot/FactorySetting

8.2.3.2.3 AlarmSetting

Figure8‐40 Control–BCUAlarmSetting
 DownlinkInputOverload:Allowstheusertospecifythelevelatwhichthe
DLInputOverloadalarmis
triggered.Valuesrangefrom0dBmto+25dBm.
 DownlinkSignalLow:AllowstheusertospecifythelevelatwhichtheDLSignalLowalarmistriggered.
Valuesrangefrom‐10dBmto+20dBm.
 DownlinkInputOverloadAlarmOn:Allowstouser
toenableordisabletheInputOverloadAlarm
 [Path–A/B/C]DownlinkSignalLowAlarmOn:AllowstheusertoenableordisabletheDLSignalLow
alarmforeachRFpath.
8.2.3.3 Control–RFU

Figure8‐41 Control‐RFU
 