User's Manual


AdvancedRFTechnologies,Inc.  88

8.2.3.3.1 GeneralSetting
Toenableanyofthesettings,clickonthecheckboxandclicktheApplybutton.

Figure8‐42 GeneralSetting(Control–RFU)(Admin)
 
Figure8‐43 GeneralSetting(Control–RFU)(User)
Table8‐14 DescriptionforGeneralSetting
Name Description AvailableAccounts
DownlinkALC EnablesordisablesDownlinkALC Administrator
UplinkALC EnablesordisablesUplinkALC Administrator
DownlinkON EnablesordisablestheRFUDownlinkpath Administrator,User
UplinkON EnablesordisablestheRFUUplinkpath Administrator,User
UplinkNoiseDet DisplaysifthemoduleisturnedonoroffduetotheULNoiseDetection
Routine
Administrator
8.2.3.3.2 Reboot/FactorySetting
AllowstheuserrebootorrestorefactorysettingsoftheRFU.

Figure8‐44 Reboot&FactorySetting(Control–RFU)
8.2.3.3.3 UplinkNoiseDetection(AdminOnly)

Figure8‐45 ULNoiseDetection(Control–RFU)