User's Manual


AdvancedRFTechnologies,Inc.  95

Table8‐20 DescriptionforManualAttenControl(Control‐RU)
Name Description Range Default
threshold
AvailableAccounts
DownlinkAtten Allowstheusertospecifyhowmuchattenuationtouse. 0~30dB 30dB Administrator,User
UplinkAtten Allowstheusertospecifyhowmuchattenuationtouse. 0~25dB 25dB Administrator,User
DLOutputALC
Level
Theremotemodulewillpreventthedownlinkoutput
powerfromexceedingthespecifiedvalue.
5~43dBm 43dBm Administrator,User
ULOutputALC
Level
Thesystemwillpreventtheoutputpowertoexceedthe
specifiedvalue.
0~10dBm
5or
6dBm
Administrator
DLOutputALC
Offset
Whentheincomingsignallevelincreases,thesystemwill
notadjustthegainlevelsuntilitreachestheALCOffset
Level.
0~10dB 5dB Administrator,User
ULOutputALC
Offset
Whentheincomingsignallevelincreases,thesystemwill
notadjustthegainlevelsuntilitreachestheALCOffset
Level.
0~10dB 3dB Administrator
8.2.3.6.5 AlarmSetting

Figure8‐59 AlarmSetting(Control‐RU)
 DL Over Power Limit: The overpower alarm threshold can be adjusted from 5~43dBm. +2dB from the DL
overpowerlimitwilltriggerasoftfailand>2dBwilltriggerahardfailalarm
 VSWRAlarmON:Enableor
disablestheVSWRAlarm.
 