User's Manual



AdvancedRFTechnologies,Inc.  97



8.2.4.1.2 SNMP



Figure8‐62 SNMP(Install–NMS)

The SNMPsection allowsyou tospecify the Site ID and Manager IP.The Site‐ID isthe codethat isused to

identifyaparticularmodule.TheManagerIPfieldiswheretheuserinputstheIPaddressofthe

NOCsystemthat

isbeingusedtomonitortheSNMPtraps.



8.2.4.1.3 Location

Thissectionallowstheusertoinputthelatitudeandthelongitudeoftherepeater.



Figure8‐63 LocationSetting(Install–NMS)

 SelectNorSfromthedropdownmenuforLatitude

 SelectE

orWfromthedropdownmenuforLongitude

 Inputthefirst3numbersofthelatitude/longitudeinthetextareaafterthe“+”and beforethe“.”

 Inputthelast6numbersofthelatitude/longitudeinthetextareaafterthe“.”



8.2.4.1.4 ExternalModemBoxSettings

This

section allows theuser tospecify an alternativeIP, Subnet Mask, and Gatewaysettings.Thesesettings

areenabledwhentheHost/RemoteswitchissettotheRemoteposition.



Figure8‐64 ExternalModemBoxSetting(Install–NMS)



8.2.4.1.5 Description