User's Manual

Advanced RF Technologies, Inc.
70
8.2 Administrator/User Mode
8.2.1 Common
8.2.1.1 Navigation tree Lock/Unlock
When the system is “Locked”, a green lock icon will appear above the navigation tree. When the system is
locked, new devices cannot be added. Any devices added to the system when the system is “Locked” will not be
detected by the NMS. After a system has been commissioned properly, the system should be left in the “Locked”
position. To unlock the system, click on the “Unlock System” button to the right of the icon.
When the system is “Unlocked”, an orange icon will appear above the navigation tree. When the system is
unlocked, new devices added to the system will be automatically detected. Once the new hardware appears in the
system tree, then the system can be locked. To lock the system, click on the “Lock System” button to the right of
the icon.
Figure 8-2 Navigation tree Lock/Unlock
8.2.1.2 Navigation Tree
Figure 8-3 Navigation tree
The navigation tree located on the left hand side of the Web-GUI allows the user to switch between the
various modules that are connected to the system.
Table 8-2 Navigation tree
Parameters Description
Expands the entire navigation tree
Collapses the entire navigation tree
The module has the expandable subordinate modules
The branch is currently expanded
The module has soft fail alarm
The module has hard fail alarm
The module has no alarms (normal)
The selected module will have orange colored text