User's Manual

Advanced RF Technologies, Inc.
80
Table 8-9 Summary Description
Parameters Description
Connected Displays the number of Remote Module’s connected to the ADX-RACK-ODU
.
Soft Fail Displays the total number of soft fail present.
Hard Fail Displays the number of hard fail present on each module.
Link Fail Displays the number of link fail present on each module.
Not Commissioned Displays the number of non-commissioned or commission failed module.
Commissioned Display the number of successfully commissioned module
8.2.2.4.2 RF Status
Displays the DL input power and the UL output power for each ODU.
An ADX-RACK-ODU is composed of 2 ODUs.
Figure 8-21 RF Status (Status – ODU)
8.2.2.4.3 Optic Status
Display LD Power and PD Power for each optic path. LD Power is the power that is being sent to the HRU and
PD Power is the power that is being received from the RU.
Figure 8-22 Optic Status (Status – ODU)
8.2.2.4.4 Optic Atten (Admin Only)
The ADX-H-ODU has 3 types of attenuators.
 Downlink Common Attenuator- Displays the common attenuation level on the DL path.
 Uplink Common Attenuator- Displays the common attenuation level on the UL path.
 Uplink Optic Attenuator- Displays the amount of attenuation used at each optical link.