User's Manual

Advanced RF Technologies, Inc.
88
8.2.3.2.2 Reboot / Factory Setting
Allows the user reboot or restore factory settings of the BCU.
Figure 8-39 Control – BCU Reboot/Factory Setting
8.2.3.2.3 Alarm Setting
Figure 8-40 Control – BCU Alarm Setting
x Downlink Input Overload: Allows the user to specify the level at which the DL Input Overload alarm is
triggered. Values range from 0 dBm to +25 dBm.
x Downlink Signal Low: Allows the user to specify the level at which the DL Signal Low alarm is triggered.
Values range from -10 dBm to +20 dBm.
x Downlink Input Overload Alarm On: Allows to user to enable or disable the Input Overload Alarm
x [Path – A/B/C] Downlink Signal Low Alarm On: Allows the user to enable or disable the DL Signal Low
alarm for each RF path.
8.2.3.3 Control – RFU
Figure 8-41 Control - RFU