User's Manual Part 1


AdvancedRFTechnologies,Inc.  14

1. INTRODUCTION
Upto(8)frequencybandsinonebody:CurrentlytheADXsupports700MHz(LowerA,LowerB,LowerC,and
UpperC),700MHzPublicSafetyw/UpperDsupport,Cellular,PCS,SMR800/SMR900,andAWSbands.

1.1 Highlights
 ModularStructure
‐ Supportsmultibandsservice(700MHz,700MHz
PS,Cell,PCS,AWS,SMR800/SMR900etc.)inonebody
‐ Supportsupto8RFunits
 Supportsoptionalcombining/balancingofmultiplecarriers’signalsviaBCU(BandCombinerUnit)
 Supportsuptoaofmaximumof32SISORemoteUnits
 30dBmofdownlinkcompositeoutputpower
o 33dBm
availableforPCSandAWS
 Requiresonlysinglestrandoffiberperremoteunit
 Operateswithupto5dBoopticalloss(Singlemode)
 SupportsSNMPv1,v2,v3(get,set&traps)
 Web‐basedGUIInterface;No3rdpartyGUIsoftwarerequired
 Web‐GUIconnectivityvia
DHCPinhostmode
 VersatilityandUsability:ADX givestotalcontrol totheuser.Controlparameterssuchasgain,outputpower,
andalarmthresholdcanbechangedusingWeb‐GUIinterfaceallowingtheusertofinetunethesystemtothe
givenRFenvironment.
 Uplinknoisemeasurementroutine
 SupportRUViewmode,refertosection3.1.1.4
 Incremental Automatic Shutdown/Resume Time: ADX gradually increases the time span between automatic
shutdownandresumeperiodbeforeitpermanentlyshutsitselfdown
 SupportALCfunctiontopreventADXDASfrominputoverloadoroutputoverpower
 