User's Manual Part 1
AdvancedRFTechnologies,Inc. 41
Figure3‐35 BatteryBackupPort&BatteryBackupSwitch
When the Battery S/W is set to the ON position,the power supply charges theoptionalADRF‐BBU(External
BackupBattery)(Figure3‐35).
TheRUPSUcanbeconnectedtoanADRF‐BBU(ADRF BatteryBackupUnit)toprovide
powerduringapower
failure.IfanADRF‐BBUisutilized,connecttheADRF‐BBU totheRU PSU viatheexternalbatterybackupportas
showninFigure3‐35.
(WARNING:ThecircuitswitchontheADRF‐BBUmustbesettoOFFbeforeconnectingtheADRF‐BBUto
the
HEPSUtopreventdamagetotheHEPSUortheADRF‐BBUandpersonalinjury.)
Note: Please contact ADRF Technical Support for assistance if you are unfamiliar with the installatio n
procedureofourbatterybox.
TheprocedureforconnectingRUPSUtoBBU
BATTS/WOFF
ConnectBBUtoRUPSUBatteryportusingRUbatterycable
BATTS/WON
3.2.3.2.4 DCOutputPort
Figure3‐36 DCOutputPort(RUPSU)
(8)DCoutputportsareavailabletoconnectupto8remotemodules(MasterorSalveRU’s)
3.2.3.2.5 PSUAlarmPort
Figure3‐37 PSUAlarmPort(RUPSU)
ConnectstotheMasterRUtomonitorthestatusoftheADX‐R‐PSU‐30
TheADX‐H‐NMS&MasterRUmonitorthestatusoftheADX‐R‐PSU‐30viathisport
4. CABLECONNECTION