User's Manual Part 2


AdvancedRFTechnologies,Inc.  112

connector
Remote‐Unit N‐type(Female)
Input/outputImpedance
50

9.3 FCCCertification
Item FCCCertification
ADX‐R‐SMR Part20,Part90
ADX‐R‐78P Part90
ADX‐R‐BT Part20

10. ANTENNASPECIFICATIONS
10.1 OmniAntenna
Frequency 698‐960MHz 1710‐2690MHz
Polarization Vertical
Gain 2dBi 3dBi
VSWR <1.7:1 <1.5:1
Impedance
50
PowerRating 50W

Note.
Please note that integrators, end‐users or installers should not use the antenna with more gain than 3dBi(For
Model:ADX‐R‐BT),2dBi(ForModel:ADX‐R‐SMR,ADX‐R‐78P)tomeettheRFexposurerequirement.


Part90.635requirement
Antennas must be installed in accordancewith FCC 90.635.
 With 2 dBi gain antennas the height of the antenna
aboveaverageterrain(HAAT)ispermittedover1372m.Fordifferentgainantennasrefertotherelevantrules.

Part90.219requirement
The radiated power must be limited to 1W. Therefore, this device meet the 90.219 (e)(1) 5W ERP limitation
requirement.

Prior
toequipmentusetheservicemustberegisteredwiththeFCC.ThiscanbedonethroughtheFCC’swebsiteat
https://signalboosters.fcc.gov/signal‐boosters

메모 [Y7]: FCCpart 명기
15/02/03
메모 [Y8]: 안테나규격추가
15/02/03