User's Manual

Advanced RF Technologies, Inc.
109
9. SYSTEM SPECIFICATION
9.1 Specification for PS78, SMR
Parameters PS78 SMR
Frequency
Downlink
P7 763-775MHz S8 851-869MHz
S8 851-869MHz S9 935-940MHz
Uplink
P7 793-805MHz S8 806-824MHz
S8 806-824MHz S9 896-901MHz
Input Power Range
0~+25dBm
Gain
Downlink
5~30dB
, 0.5dB step, ATT range: 0~25dB
Uplink
-
5~30dB, 0.5dB step, ATT range: 0~35dB
Maximum
Output
Power
1
Downlink at
RU
30dBm
±2dB
Uplink at HE
-15dBm±2dB
Noise Figure
< 10dB@maximum gain
VSWR
< 1:1.5
O
ptical Loss
0~5dBo
System Delay
< 2us
Spurious
Meet FCC rules, 3GPP TS 36.104, 3GPP2 C.S0010-C
Nominal
Band/BW
for Industry
Canada
Downlink
P7
A~B MHz/bw MHz
S8
C~D MHz
S8
E~F MHz
S9
G~H MHz
Uplink
P7
I~J MHz
S8
K~L MHz
S8
M~N MHz
S9
O~P MHz
Dimension
(WXDXH)
Head-End Shelf
19.0 x 14.6 x 12.2 inches (482 x 370 x 311 mm)
Remote-Unit
Shelf
19.0 x 12.9 x 10.5 inches (482 x 328.2 x 266.5 mm)
Master RU
11.8 x 9.8 x 4.5 inches (300 x 249.6 x 114.5 mm)
Slave RU
11.8 x 9.8 x 3.7 inches (300 x 249.6 x 94.5 mm)
Weight
Head
-End
Shelf
83.7 lbs (38.0 Kg) @4 RFU, CHC
-H, PSU and NMS
Remote-Unit
Shelf
61.0 lbs (27.7 kg) @ 1 master RU, 3 Slave RU
Master RU
13.2 lbs (6.0 kg)
Slave RU
11.7 lbs (5.3 kg)
Operating Temperature
14-122
q
F(-10-50°C)
Operating Humidity
5~90%RH
Power
Input
110/220V, 50
-60Hz, 24V or -48V DC(optional)
Power
consumption
Head
-End
52W@4 RFU, 1 OPT and NMS
28W@1 RFU, 1 OPT and NMS
1
The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when
multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output
signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of
input power or gain reduction and not by an attenuator at the output of the device
ָ֦ [Y4]:
ݨࢿԻ ্ࢽଜ܈۰
࢏ࡁঐଢТЬ
.
15/02/03