User's Manual

Advanced RF Technologies, Inc.
110
Remote-Unit
60W
53W
Network Management System
Ethernet(RJ45)
RF
connector
Head
-End
N
-type(Female)
Remote
-Unit
N
-type(Female)
Input/output Impedance
50:
9.2 Specification for VU, BT
Parameters VU BT TBD
Frequency
Downlink
VHF
136
-174MHz
2496
-2690MHz
(BRS TDD)
UHF
396
-512MHz
Uplink
VHF
136-174MHz
2496
-2690MHz
(BRS TDD)
UHF
396-512MHz
Input Power Range
-15~+37dBm
Gain
Downlink
-12~40dB, 0.5dB step,
ATT range: 0~52dB
0~52dB, 0.5dB step,
ATT range: 0~52dB
Uplink
-15~20dB, 0.5dB step,
ATT range: 0~35dB
-5~30dB, 0.5dB step,
ATT range: 0~35dB
Maximum
Output
Power
2
Downlink at
RU
25
dBm±2dB
37
dBm±2dB
Uplink at HE
-15dBm±2dB
-15dBm±2dB
Noise Figure
< 10dB@maximum gain
VSWR
< 1:1.5
O
ptical Loss
0~5dBo
System Delay
< 2us
Spurious
Meet FCC rules, 3GPP TS 36.104, 3GPP2 C.S0010-C
Nominal
Band/BW
for Industry
Canada
Downlink
VHF
A~B MHz
/bw MHz
NA
UHF
E~F MHz
Uplink
VHF
C~D MHz
NA
UHF
G~H MHz
Dimension
(WXDXH)
Master RU
11.8 x 9.8 x 4.5 inches (300 x 249.6 x 114.5 mm)
Slave RU
11.8 x 9.8 x 3.7 inches (300 x 249.6 x 94.5 mm)
Weight
Master RU
13.2 lbs (6.0 kg)
Slave RU
11.7 lbs (5.3 kg)
Operating Temperature
14-122
q
F(-10-50°C)
Operating Humidity
5~90%RH
Power Input
110/220V, 50-60Hz, 24V or -48V DC(optional)
Power
consumptio
Head
-End
52W@4 RFU, 1 OPT and NMS
28W@1 RFU, 1 OPT and NMS
2
The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when
multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output
signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of
input power or gain reduction and not by an attenuator at the output of the device
ָ֦ [Y5]:
ݨࢿԻ ্ࢽଜ܈۰
࢏ࡁঐଢТЬ
.
15/02/03