User's Manual

Advanced RF Technologies, Inc.
69
8.2.2.1.4 HE Commissioning Status
Display commissioning status of each HE component.
Figure 8-9 HE Commissioning status
Table 8-6 Description for HE Commissioning status
Status Display Description
Installed Status
Physically Installed
Text is black
Physically Not-Installed
Text is gray
Commissioning Status
Success
Green
Failed or not commissioned
Gray
8.2.2.1.5 Alarm
Displays alarm status of the NMS. If an alarm is present in the system, the color of the system alarm tab will
change according to the type of failure.
Table 8-7 Description for NMS alarm
Alarm Severity Description
System
Over Temperature
Hard Fail /
Soft Fail
Temperature of NMS is higher than the threshold
level for over temperature alarm
Under Temperature
Soft Fail
Temperature of the NMS is lower than the threshold
level for under temperature alarm
System Halt H
ard Fail
HE system halt
Power Alarm
AC Fail Soft Fail
AC power is operating outside of its normal range
DC Fail Soft Fail
DC power is operating outside of its normal range
Over Current Hard
Fail
Total current of HE is higher than the threshold level
for over current alarm
Battery Low Soft Fail
Voltage of battery connected to HE PSU is lower than
the defined threshold