User's Manual Part 2

Advanced RF Technologies, Inc.

8. WEB-GUI

8.1 Web-GUI Setup

The Web-GUI allows the user to communicate with the DAS system either locally or remotely. To connect to

the DAS system locally, you will need a laptop with an Ethernet port and a RJ-45 crossover cable. To connect to

the DAS system remotely, you will need to have an active internet connection and the ADX system must have and

external modem box connected to the ADX.

8.1.1 DAS system/PC Connection Using Web-GUI

 Verify that your Local Area Connection is set to Obtain an IP address automatically under the Internet Protocol

(TCP/IP) properties

- If you are connecting to the unit remotely (use of a modem), then skip this and next step.

 Connect the RJ-45 crossover cable between the laptop’s Ethernet port and the repeater’s Ethernet port

 Launch an Internet Browser

 Type the following IP address into the address bar of Microsoft Internet Explorer: http://192.168.63.1

- If you are connecting to the unit remotely, then type the IP address of the modem to connect to the unit

 The following login screen will appear:

Figure 8-1 Login screen

If you are not the Administrator, please type in your assigned username & password which you should have

received from the Administrator.

Table 8-1 Account Information for Login

Account type

Show items

Control Items

Default ID

Default Password

Administrator

all Items

all items

admin

User

restricted items

adrf

Guest

restricted items

read-only

guest