User's Manual Part 2

Advanced RF Technologies, Inc.
67
8.2.1.3 Power Status
Display the power source that is currently being used.
Table 8-3 Power Supply Status
Input Power Status
Display Image
AC
Battery
8.2.1.4 Commissioning Status
Display whether or not the module has successfully been commissioned.
Table 8-4 Commissioning ICON
Status
Display Image
Commissioned
Not-Commissioned
8.2.1.5 Information
Figure 8-4 ADX DAS General Information
 Information: Displays the serial number, latitude/longitude, firmware version of selected module, and Web
GUI version of the NMS.
 Location: Displays the address where the ADX DAS is installed.
 Description: Displays the description of selected module. The description of each module can be edited from
the Install tab. It is recommended to use the location of the module as the description. This description
information can be seen when hovering over the device tree in order to easily identify each component.
 Technical Support: Displays ADRF’s Technical Support contact information.
 Installer Contact Info: Displays the contact information of the installer.