User's Manual Part 2

Advanced RF Technologies, Inc.
70
8.2.2.1.4 HE Commissioning Status
Display commissioning status of each HE component.
Figure 8-9 HE Commissioning status
Table 8-6 Description for HE Commissioning status
Status
Display
Description
Installed Status
Physically Installed
Text is black
Physically Not-Installed
Text is gray
Commissioning Status
Success
Green
Failed or not commissioned
Gray
8.2.2.1.5 Alarm
Displays alarm status of the NMS. If an alarm is present in the system, the color of the system alarm tab will
change according to the type of failure.
Table 8-7 Description for NMS alarm
Alarm
Severity
Description
System
Over Temperature
Hard Fail /
Soft Fail
Temperature of NMS is higher than the threshold
level for over temperature alarm
Under Temperature
Soft Fail
Temperature of the NMS is lower than the threshold
level for under temperature alarm
System Halt
Hard Fail
HE system halt
Power Alarm
AC Fail
Soft Fail
AC power is operating outside of its normal range
DC Fail
Soft Fail
DC power is operating outside of its normal range
Over Current
Hard Fail
Total current of HE is higher than the threshold level
for over current alarm
Battery Low
Soft Fail
Voltage of battery connected to HE PSU is lower than
the defined threshold