User's Manual Part 3

Advanced RF Technologies, Inc.
94
8.2.4.1.2 SNMP
Figure 8-62 SNMP (Install – NMS)
The SNMP section allows you to specify the Site ID and Manager IP. The Site-ID is the code that is used to
identify a particular module. The Manager IP field is where the user inputs the IP address of the NOC system that
is being used to monitor the SNMP traps.
8.2.4.1.3 Location
This section allows the user to input the latitude and the longitude of the repeater.
Figure 8-63 Location Setting (Install – NMS)
 Select N or S from the dropdown menu for Latitude
 Select E or W from the dropdown menu for Longitude
 Input the first 3 numbers of the latitude/longitude in the text area after the “+” and before the “.”
 Input the last 6 numbers of the latitude/longitude in the text area after the “.”
8.2.4.1.4 External Modem Box Settings
This section allows the user to specify an alternative IP, Subnet Mask, and Gateway settings. These settings
are enabled when the Host/Remote switch is set to the Remote position.
Figure 8-64 External Modem Box Setting (Install – NMS)
8.2.4.1.5 Description