User's Manual Part 3

Advanced RF Technologies, Inc.

8.2.4.2.1 RFU Commissioning

This section allows the user to perform RFU commission. To perform RFU commissioning, select a DL Input

Commissioning Level from the dropdown menu and click Apply. The commissioning progress is displayed on the

Commissioning Progress bar. Any errors, warnings, and messages will appear via a popup window. Please refer to

the ADX Installation Guide to determine the proper RFU commissioning levels.

Figure 8-70 RFU Commissioning (Install – RFU)

8.2.4.2.2 Description

This section allows the user to set the description of RFU.

Figure 8-71 Description (Install – RFU)

8.2.4.3 Install – OPT

Figure 8-72 Install – OPT

8.2.4.3.1 Optic Commissioning

This section will allow the user to perform any optic compensation if it is necessary. The Commissioning

button will turn orange if optic compensation is needed.