User's Manual Part 3

Advanced RF Technologies, Inc.
112
connector
Remote-Unit
N-type(Female)
Input/output Impedance
50
9.3 FCC Certification
Item
FCC Certification
ADX-R-SMR
Part 20, Part 90
ADX-R-78P
Part 90
ADX-R-BT
Part 20
10. ANTENNA SPECIFICATIONS
10.1 Omni Antenna
Frequency
698-960MHz
1710-2690MHz
Polarization
Vertical
Gain
2dBi
3dBi
VSWR
<1.7:1
<1.5:1
Impedance
50
Power Rating
50W
Note.
Please note that integrators, end-users or installers should not use the antenna with more gain than 3dBi(For
Model: ADX-R-BT), 2dBi (For Model: ADX-R-SMR, ADX-R-78P) to meet the RF exposure requirement.
Part 90.635 requirement
Antennas must be installed in accordance with FCC 90.635. With 2 dBi gain antennas the height of the antenna
above average terrain (HAAT) is permitted over 1372m. For different gain antennas refer to the relevant rules.
Part 90.219 requirement
The radiated power must be limited to 1W. Therefore, this device meet the 90.219 (e)(1) 5W ERP limitation
requirement.
Prior to equipment use the service must be registered with the FCC. This can be done through the FCC’s website at
https://signalboosters.fcc.gov/signal-boosters
메모 [Y7]: FCC part 명기
15/02/03
메모 [Y8]: 안테나 규격 추가
15/02/03