User's Manual

Advanced RF Technologies, Inc.
47
6.4 Optic Port Cleaning
 We recommend cleaning optic connector using a dry optical cleaning swab or tissue in a dry environment
as needed. We recommend cleaning the optic connectors only if the expected optic loss is higher than
the loss reported in the Web-GUI by 1.5dBo. (Figure 6-5)
 When optic connector are not in use, the port should be covered with a protective dust cap. (Figure 6-6)
Figure 6-5 Optic Connector Cleaning (left) and Optic Port Cleaning (right)
Figure 6-6 SC/APC Optic Connector Dust Cap