User's Manual

Advanced RF Technologies, Inc.
60
"The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present,
the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band
users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device."
RU
ADXV-R-PSU-AC: 100 to 240V, 50-60Hz with battery backup function
ADXV-R-PSU-DC: -36V to -72V DC
Network Management
System
Ethernet(RJ45)
RF
connector
POI
DIN (Female) | SMA (Female) | SMB (Female)
POIL
4.3-10 (Female) | SMB (Female)
Remote
Modules
4.3-10 (Female) | SMA (Female)
Weather Resistance
(Remote Modules)
IP66