User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. AXM700F-9543-ICS-X Web-GUI Setup
- 6. Maintenance Guide for AXM700F-9543-ICS-X Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. mechanical drawing
- 10. Appendix
Advanced RF Technologies, Inc.
25
4.4 Line of Sight
The donor antenna which points towards the eNode-B (or BTS) typically has a narrow beam antenna pattern.
As a result, a slight deviation away from the direction of the eNode-B (or BTS) can lead to less than optimal results.
In addition, obstacles between the repeater and the eNode-B (or BTS) may impair the repeater from obtaining any
eNode-B (or BTS) signal. As a result, the repeater cannot transmit signal to the coverage area. Therefore, a direct
line of sight to the eNode-B (or BTS) for the donor antenna is vital to the operation of a repeater. For the same
reason, placing the server antenna in direct line of sight of the coverage area is also necessary.
Figure 4-4 Line of Sight to the eNode-B (or BTS)