User Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. AXM700FB-9543-ICS-XP Web-GUI Setup
- 6. Maintenance Guide for AXM700FB-9543-ICS-XP Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. mechanical drawing
- 10. Appendix
Advanced RF Technologies, Inc.
10
1. INTRODUCTION
The AXM700FB-9543-ICS-XP is an over-the-air high power repeater.
1.1 Highlights
• Active ICS (Interference Cancellation System)
• Band Selectable
• Digital filtering with sharp roll-off (>50dBc @ ± 1 MHz from sub-band edge)
• Remote monitoring and control capability using our Web-based GUI
• 95 dB of max gain and 43/30dBm (DL/UL) Composite power
• LED panel provide signal strength and alarm status
• Support optional internal modem box for remote access and alarming
• Configurable network setting in order to interface with 3rd party external modem boxes
• Adjustable AGC Output Power Level
• Supports Network Management Monitoring System via SNMP
• Incremental Automatic Shutdown/Resumption Time: AXM700FB-9543-ICS-XP gradually increases the time
span between automatic shutdown and resumption before it permanently shuts itself down
• Versatility and Usability: AXM700FB-9543-ICS-XP gives total control to the user. Most of the control
parameters, e.g., gain, output power, alarm threshold, etc. can be changed using the Web-GUI so that the user
can adjust the system perfectly to the given RF environment
• Web-GUI connectivity via DHCP
• Supports DHCP; No 3
rd
party GUI software required
• Automated installation
• Direct ray cover on heat-sink to prevent direct light (Front door)
• Membrane vent to prevent moisture by condensation