User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. PSR-78-9533 Web-GUI Setup
- 6. Maintenance Guide for PSR-78-9533 Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. Mechanical Drawing
- 10. Appendix
Advanced RF Technologies, Inc.
18
2.3 Cable Connection
2.3.1 AC Power
AC power is accepted through a standard 3-wire male plug (MS3106A-22-2S) with phase, neutral, and ground
leads. The AC power is wired to a high-efficiency DC switching power supply which is UL approved.
The AC port is located at the bottom of the repeater and has a free range input of 100-240V AC.
Figure 2-3 AC Input Port
Figure 2-4 AC On/Off Switch
The AC Power on/off switch is on the left-hand side of the PSU which is located inside of the repeater.
AC On/Off switch