User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. PSR-78-9533 Web-GUI Setup
- 6. Maintenance Guide for PSR-78-9533 Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. Mechanical Drawing
- 10. Appendix
Advanced RF Technologies, Inc.
26
4. INSTALLATION
4.1 Installation Procedures
4.1.1 Wall Mount Procedure
• Verify that the PSR-78-9533 and mounting hole are in good condition
• Place the PSR-78-9533 mounting bracket template up against the wall and mark off mount holes
• Drill the appropriate size holes and install the included wall anchors
• Remove the wall mount bracket from the repeater and bolt the wall mount bracket to the wall
• Place the repeater onto the wall mount bracket and secure the bracket to the repeater
• Connect the GND cable
• Connect the Antenna cable
• Connect the Power cable
Figure 4-1 Wall Mount
Wall Mount
Bracket