User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. PSR-78-9533 Web-GUI Setup
- 6. Maintenance Guide for PSR-78-9533 Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. Mechanical Drawing
- 10. Appendix
Advanced RF Technologies, Inc.
42
5.5.3 System – Update
To perform a firmware update, click on the Update tab and the following screen will appear.
Figure 5-25 System – Update
Click on the Choose File button and locate the firmware file.
Click on the Upgrade button to perform the firmware update.
Once the firmware update is complete, the following popup message will appear:
Figure 5-26 Pop-up Message after System Update is Complete
5.5.4 System – Backup & Restore
The backup section allows the user to save the settings of the repeater. To perform the backup, click on the
Backup button and you will be prompted to save the backup file. To restore the settings to the system, click on
Choose File button, select the backup file, and click the Restore button.
Figure 5-27 System Backup