User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. PSR-78-9533 Web-GUI Setup
- 6. Maintenance Guide for PSR-78-9533 Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. Mechanical Drawing
- 10. Appendix
Advanced RF Technologies, Inc.
9
1. INTRODUCTION
PSR-78-9533 bi-directional amplifier (BDA) extends the coverage area of radio communications in buildings and RF
shadow environments. The unit features low noise figure and wide dynamic range.
1.1 Highlights
• Supports both 700MHz and 800MHz Public Safety Frequencies in a single repeater
• Supports a total of 2 wide band and up to 32 non-contiguous narrow band channels (700MHz + 800MHz
PS)
• Air convection cooling without fans
• Sharp Filter Roll-off performance (Wide: 60dBc @ Filter Bandwidth Edge + 1MHz | Narrow: 55dBc @
Filter Bandwidth Edge + 3 * Filter BW)
• Supports SNMP v1, v2c, v3 (get, set, & traps)
• Web-based GUI Interface; No 3rd party GUI software required
• Web-GUI connectivity via DHCP in host mode
• External Alarm Function supporting dry contacts, 11 outputs and 1 input