User's Manual

Advanced RF Technologies, Inc.
32
5.4.2 SNMP
Figure 5-19 SNMP
The SNMP section allows you to specify the Site ID, Description and Manager IP. The Site-ID is the code that is
used to identify a particular module. The Description is separate field for user. The Manager IP field is where the
user inputs the IP address of the NOC system that is being used to monitor the SNMP traps.
5.4.3 Location
This section allows the user to input the latitude and the longitude of the repeater.
Figure 5-20 Location Setting
5.4.4 Remote Ethernet Settings
This section allows the user to specify an alternative Repeater IP, Subnet Mask, and Gateway settings. These
settings are enabled when the Host/Remote switch is set to the Remote position.