METAL WALL FAN INSTRUCTION/OPERATING MANUAL 1
READ AND FOLLOW ALL INSTRUCTION BEFORE OPERATING FAN CAUTION Read and follow all instruction before operating fan.Do not use fan if any part is damage or missing. WARNING 1.To reduce the risk of fire or electric shock, do not use this fan with any solid state speed control device. 2.This appliance has a polarized plug which is intended to fit in an outlet only one way. If this does not fit outlet, contact a qualified electrician. Do not attempt to by-pass this procedure. 3.
ASSEMBLY Before commencing assembly familiarize your self with all the assembly components(see chart and diagram); Ask a professional to install the fan！ Use the following information as a guideline only. It is the user's responsibility to be sure the location and the wall surface can handle the weight of this fan . Wall fans are recommended for installation on 12 inch (300 mm) thick dry cement grout solid walls or 4 x 5 inch wood studs/joists.
HOW TO USE Speed control Turn the position switch to select the speed.The numbers0,1,2 ,3,4and 5 on the board represents power off. Oscillation Press switch to ON and the fan begins to shake head.Press switch to OFF and the fan stops to shake head. Tilting adjustment Always switch the fan off before Making a tilt adjustment, the air Flow can be adjusted upward or Downward by simply moving the Guard up or down Do not touch the blades with your hands or with any hard object when the fan blade are in motion.
